Author: Alain Chautard

Alain is a Google Developer Expert in Web Technologies, Angular, and Google Maps. His daily mission is to help development teams adopt Angular and build at scale with the framework. He has taught Angular on all six continents! A world traveler and photographer, Alain is also an international conference speaker, and a published author of several video courses.

Anti-pattern series: Not unsubscribing from Observables

Alain Chautard

We covered this in our newsletter before: Observables can cause memory leaks if we don’t unsubscribe from them.

Before Angular 16, there were a few different techniques available to unsubscribe automatically, the best of those being the async pipe (and yes, it’s possible to use the async pipe 100% of the time if you use the tricks highlighted here – no excuses).

With Angular 16, things are even better, as you can use the new takeUntilDestroyed operator as follows:

But here’s my million-dollar tip for today: Instead of using takeUntilDestroyed in your components, use it in the services that expose such Observables:

That way, whether you use an async pipe or not, your components are covered. That’s one of the nice things about Observables: We can change them whenever and wherever we want using pipe(), including in our services – so that all subscribers benefit from that change downstream.

mergeMap RxJs operator

Alain Chautard

A few months back, we covered the switchMap operator from RxJs. Today, let’s look at a similar operator called mergeMap:

The marble diagram isn’t as obvious as it is for other operators, so let’s clarify what mergeMap does:

  • It takes values from an observable and maps them to another observable
  • Then it allows us to combine the values from both observables into one new observable

What’s a real-life use case for mergeMap?

Let’s say you want to display a list of products with their associated categories. The product information is stored in one API endpoint, and the category information is stored in another API endpoint. To display the list of products with their categories, you need to make a separate API call for each product to retrieve its category information.

You can use mergeMap to combine the two API calls and merge the results into a single stream of data (product + category).

How is it different from switchMap?

mergeMap differs from switchMap in two important ways:

  1. switchMap only returns the data from observable #2 – mergeMap returns data from both observable #1 and #2 and allows us to combine that data any way we want
  2. switchMap cancels observable #2 whenever observable #1 emits a new value, then re-creates another observable #2. mergeMap doesn’t do that.

In other words, switchMap is perfect when we want to chain asynchronous actions such as “user selects a new filter, then we request new data according to that filter” because if the user changes that filter again, we want to cancel the previous request and start a new one.

Angular at Google I/O

Alain Chautard

This a very short post today as I spent most of my day at Google I/O, the annual conference where Google announces all sorts of updates ranging from AI to Android to Web, including Angular.

The Angular team had a few talks on Angular 16, all of which are now available on YouTube so that you can watch them too:

They also published a list of shorter videos (2 to 6 minutes) on Angular 16.

Signals: Why and when do we need them?

Alain Chautard

With the release of Angular 16, Signals are now available as a developer preview, which means we can start learning about Signals, testing them, and possibly adopting them.

The end goal of Signals is simple: Improve change detection in the Angular framework by removing the need for Zone.js. A signal-based application will be able to update individual views (a view is a sub-set of a component template — we create new views every time we use structural directives such as ngIf or ngFor) one by one instead of checking the entire component tree, enabling laser-focused updates of our DOM.

A secondary goal is to make Angular easier to learn by making RxJs less critical than before, which also applies to state management libraries such as NgRx or NgXs. In other words, we can rely less on operators, subjects, and the like.

Now that we covered the why, let’s talk about when to use signals. To get the full benefit of Signals in the long run, using them everywhere we have Observables or data bindings makes sense. I know this sounds like a lot of work, but that’s how we can get to a point where Angular can tell exactly which components must be updated when a value changes, no matter their location in the DOM tree.

An upcoming feature of Angular (v17 or later) will be signal-based components, where inputs, outputs, and even two-way bindings will be expressed as Signals:

I believe it makes sense to start using Signals as soon as possible. The base API is available in Angular 16 and is easy to learn. I already published a course that will be continuously updated as Signals evolve.

If you have any specific questions or concerns, feel free to send me your questions. I’ll be covering more about Signals as part of this newsletter.

Anti-pattern series: Calling a method in a template

Alain Chautard

If you’re calling a method/function in the HTML template of any of your components, try the following experiment: Add a console.log("here") inside that method.

Then, interact with your application by clicking around, entering information in a form, etc. What you’ll see in your console is something like this:

Why is this happening? Angular’s change detection runs every time an event occurs in the browser. Zone.js tells Angular that “something happened” when we interact with an Angular application. Then, Angular checks its component tree for updates. If you’re using methods in your HTML templates, the only way for Angular to see if the output of that method has changed is to… call it again.

As a result, using methods in your HTML templates is not recommended. Doing so can impact performance negatively. Instead, use bindings to class properties as follows:

Before:

After:

Note that if you need to call a method/function to perform some formatting, you should create a custom pipe. Pipes are designed to run only when their input data changes, which means they are optimized for best performance by default.

You can take a look at an example here on Stackblitz. I added a console.log("here") inside my custom pipe to showcase that it runs only once:

Angular Documentation Tricks

Alain Chautard

If you use Angular, you’re most likely familiar with the Angular website: https://angular.io.

But did you know that you access the documentation of a previous framework version by using the version number as a prefix, such as https://v14.angular.io?

Even better, you can get a glimpse of the future with https://next.angular.io or take a look at the current Release Candidate version: https://rc.angular.io.

Also, the header of the website has a different color whenever you’re not on the current version:

The red header is for the next version of Angular, the grey is for a past version, orange is for an RC, and blue is for the current one.

Sometimes though, the documentation does not answer all the questions we have, in which case we are just one click away from accessing the source code of any feature:

I used those tricks over and over again to prepare my course on Angular Signals. That’s how I could get a glimpse of the future and prepare several newsletter issues before the release of Angular 16.

RxJs concatWith operator

Alain Chautard

Our operator of the week is concatWith (the new name for concat since RxJS v7). This operator takes any number of Observables, subscribes to them one after the other, in sequence, and then returns the values emitted by the first Observable, then the second one, then the third one, etc.

Unlike forkJoin, which runs these Observables in parallel, concatWith runs them one after the other and waits for the completion of an Observable before subscribing to the next one.

As a result, concatWith can be used when:

  • We need to make multiple HTTP requests in a specific order, one after the other.
  • We need to combine user input with server data. For instance, we let the user select multiple filters in the UI, and when the user is done, we trigger an HTTP request to the server.

Angular 16 is now available!

Alain Chautard

Angular 16 is now available! You can watch a quick summary video from the Angular Team (in less than 7 minutes).

We’ve already covered quite a few of the new features in this newsletter:

Other notable features include:

  • Improved server-side rendering with non-destructive hydration: If you’re using Angular Universal, your app can now be refreshed on the client side without re-building the entire DOM (also a developer preview)
  • Angular CLI commands to convert your app to standalone components: ng generate @angular/core:standalone and to create a new standalone app with ng new --standalone
  • Experimental support of Jest (instead of Karma/Jasmine) for unit-testing
  • Support for Typescript 5.0.

The Angular team released a long blog post highlighting these features in more detail. I’ll cover more of these features individually over the following weeks, but for now, I’ll let you upgrade to the latest version with this tutorial.

NG16 Preview: Helpers to convert class guards to functional

Alain Chautard

As covered a few newsletters ago, Route guards are meant to be functions with Angular 15+. Angular 16 removes the support for class guards.

Does that mean we have to migrate our old class guards manually? Of course not! The Angular team has our back, and the Angular CLI will remove the deprecated interfaces automatically when upgrading to Angular 16 as follows:

Then, if you want to keep your guards as classes, you can do so using a helper function called mapToCanActivate:

Or you can, of course, decide to use a function instead:

Angular 16 Preview: Binding Router Information to Component Inputs

Alain Chautard

Passing parameters to routes is a frequent task with Angular. Before Angular 16, we had to inject the ActivatedRoute service and retrieve the parameters from that service using the snapshot or params properties.

With Angular 16, we can get those values automatically bound to the component inputs using the following router config:

If you’re using the RouterModule.forRoot() syntax, then enabling component input binding looks like this:

RouterModule.forRoot(routes, {bindToComponentInputs: true});Code language: JavaScript (javascript)

According to the documentation, this option can bind all route data with key-value pairs to component inputs: static or resolved route data, path parameters, matrix parameters, and query parameters.

For instance, assuming we have a URL parameter called id, if we enable the component input binding feature, then all we need in our component is an @Input decorator to receive that value:

What I like about this option is that our components do not need the ActivatedRoute service anymore, meaning they don’t have to be used just as routed components. Instead, they could be used in other scenarios where the id is passed as an HTML attribute, just like any other non-routed component. As a result, our components are more generic and not tied to a single use case.